MS Plate Weight Chart in Kg (2026)
Instantly calculate the weight of mild steel plates by thickness and size, and check our full IS 2062 reference chart before you place your next order with PS STEEL, Delhi.
Know the exact weight before you order
Mild steel (MS) Sheets are sold and billed largely by weight, so an accurate estimate helps you plan budgets, transport, and crane capacity before the material even leaves our yard.
Use the calculator below for any custom size, or scroll to our ready-made chart covering the most common thickness and sheet-size combinations used across Delhi NCR fabrication and construction projects.
Construction
Base Sheets, gusset Sheets, and structural reinforcement for buildings and bridges.
Fabrication
Tanks, hoppers, machine bases, and heavy equipment housings.
Transport & Trailers
Chassis, flooring, and load-bearing panels for commercial vehicles.
General Engineering
Custom brackets, jigs, tooling plates, and wear-resistant components.
MS Plate Weight Calculator
Enter thickness, width, length, and quantity to get an instant weight estimate in kilograms and tonnes.
How the density figure works
Mild steel has a density of approximately 7.85 g/cm³ (7,850 kg/m³). For a plate, that simplifies to Thickness (mm) × Width (m) × Length (m) × 7.85 = Weight (kg), which is the same formula used throughout this page and chart.
MS Plate Weight Chart (Kg)
Standard thicknesses against common sheet sizes, calculated at 7.85 kg/dm³ density.
| Thickness | 1 m × 1 m | 1.25 m × 2.5 m | 1.5 m × 6 m | 2 m × 6 m | 2.5 m × 12 m |
|---|
Figures are theoretical weights for planning only; actual plate weight can vary slightly due to rolling tolerance.
Need a size that's not on the chart?
Use the calculator above for any custom dimension, or send us your requirement directly.
Choosing the right MS plate grade
A quick primer on the two most commonly stocked structural grades under IS 2062, so you can specify the right material for your project.
E250 (Fe 410 W)
General-purpose structural grade suited to fabrication, general engineering, and standard construction work.
E350 (Fe 490)
Higher tensile strength grade for heavy structural members and load-bearing applications.
Thickness Tolerance
Always confirm the rolling tolerance range for your plate thickness before finalising a heavy order.
Surface & Flatness
Inspect for scale, pitting, and flatness — especially important for plates that will be laser or plasma cut.
Mill Test Certificate
Ask for the MTC on every order to verify chemical composition and mechanical properties.
A quick note on pricing
MS plate prices move with raw material and freight costs, so we don't publish fixed rates online. Share your thickness, size, and quantity via the form below for a same-day quote.
Request a Quote
Tell us your thickness, size, and quantity and our team will get back with pricing and delivery timelines the same day.
Fastest response
WhatsApp us your requirement using the button after submitting the form for the quickest reply.
Request Form
Fields marked with an asterisk are required.
About PS Steel Delhi & Technical Resources
PS Steel is a trusted manufacturer, stockist, and supplier of industrial Mild Steel (MS) and Stainless Steel (SS) pipes, plates, tubes, and fittings in Delhi NCR. With certified manufacturing standards, we provide exact weight charts, dimension guides, and custom fabrication support for major industrial projects.